After update to Version 1.3.0 and 1.3.1...My Pdf Creator is no longer able to work, even if I Replace to Version 1.2.3 again.
After the installation is complete,it shows"Setup/Uninistall stop work"because some Windows problem.
But it dosen't happen to the installation of other software.Only pdf Creator.
And I had try more than two computers,have the same problem.
I have a similar problem: At the end of the install of version 1.3.1, PDFCreator cannot install a printer.
SetupLog.txt contains:
Install printerport:
Portname : pdfcmon
Result: Success
InstallMonitor:
Monitorname : pdfcmon
Environment : Windows NT x86
Result: Error 127 = Die angegebene Prozedur wurde nicht gefunden
Install printerdriver for Win2kXP2k3 (32bit):
Drivername : PDFCreator
Environment : Windows NT x86
Result: Success
InstallPrinter:
Printername: PDFCreator
Drivername : PDFCreator
Portname : pdfcmon
Result: Error 1801 = Der Druckername ist unzulässig
I had to kill the installer, deinstalled, rebooted, and installed version 1.2.3. This version works.
I have same problem.
Hello,
which windows version do you have? And can you post yout SetupLog.txt here? It is created in the PDFCreator install path during the installation.
kind regards,
Philip
SetupLog.txt information in my Win7(X64)computer is below：
(another one is Vista(X32) had the same problem)
X64: yes
Hello,
This is something we hear of some users but could not reproduce it here to fully test it.
Can you try uninstalling PDFCreator, then reboot your PC (important) and then install the latest version again?
kind regards,
Philip
Did you find a solution for this issue meanwhile?
My installation attempts failed, even after reboot and after cleaning all entries in the registry where pdfcreator was occuring.
Installation of version 1.3.1 under Windows 2000 Server,
Setup Logfile see http://pastebin.com/FndeVYxG
The main error seems to be listed here:
InstallMonitor:
Monitorname : pdfcmon
Environment : Windows NT x86
Result: Error 127 = The specified procedure could not be found
I tried to install via Terminal session first, but on the console's main window it failed, too.
It would be the first printer driver installed, however.
I also tried with version 1.3.2 now. Same result, it does work as an update to 1.3.1 on Windows Server 2003, however I would like to install it on this machine.
I did install a different laserprinter first now, and also used the /expert parameter upon setup.
But still leading to the same error, see log here: http://pastebin.com/Y49rPe98
Help please!
Same issue reported here:
http://fr.pdfforge.org/forum/help/8419-cant-print-pdfcreator
and here:
http://de.pdfforge.org/forum/help/8380-install-version-131-terminal-server-nt2000-error-127-and-1801
Still no solution?
Same issue reported here:
http://fr.pdfforge.org/forum/help/8419-cant-print-pdfcreator
and here:
http://de.pdfforge.org/forum/help/8380-install-version-131-terminal-server-nt2000-error-127-and-1801
and here
Still no solution?
Sorry for the double post..
but there are more messages about the issue
here:
http://www.commentcamarche.net/forum/affich-2989000-probleme-d-installation-d-imprimante-pdf
I have a similar problem but also get the error message:
75 (Path/File access error)
modPdfCreator
lfLogging/WriteLogfile
line 50190
but of course, not having hte source code, that does not help much.
I too have the same issue. Unloaded, reboot, reinstall. Nothing seems to work.
here is my SetupFile
----- Setup - Start: 2012-04-16 08:30:51 -----
InstallerDirectory: C:\\Windows\\SysWOW64
X64: yes
Start AnalyzeCommandlineParameters
Parameter /VERYSILENT: false
Parameter /SILENT: false
Parameter /FORCEINSTALL: false
Parameter /REMOVEOPTIONS: false
Parameter /DONTINSTALLPRINTERS: false
Parameter /EXPERT: false
No Parameter /LoadInf
No Parameter /SaveInf
No Parameter /REGFile
No Parameter /PPDFile
No Parameter /Printername
End AnalyzeCommandlineParameters
nationCode:244
Channel: 132
InstalledPDFCreatorVersion: 1.3.0
DontInstallPrinters: false
Installed PDFCreator version is lower 1.3.1: true
Printerstatus before installing:
Spooler service: is running
Printermonitors [3]:
WSD Port
Standard TCP/IP Port
Local Port
Printerports [22]:
WSD-3ed08242-c7c4-4845-a479-21f46cae915a.006a
WSD-705cb15b-8679-4739-9bcb-b8f48ef4af55.006b
USB005
USB004
USB003
USB002
USB001
DOT4_001
192.168.1.145
192.168.1.4
BRW002258164517
HP_192.168.2.5_CN8ATD30P7059H
COM1:
COM2:
COM3:
COM4:
FILE:
LPT1:
LPT2:
LPT3:
XPSPort:
COM5:
Printerdrivers (Windows 4.0) [0]:
Printerdrivers (Windows NT x86) [0]:
Printerdrivers (Windows x64) [10]:
SHARP XPS A
SHARP MX-3100N PCL6
Microsoft XPS Document Writer
HP Photosmart C4500 series
HP Officejet 4500 G510n-z fax
HP Officejet 4500 G510n-z
HP Deskjet 3500 Series
Canon MP190 series Printer
Brother HL-2270DW series
Brother HL-2240 series
Printerdrivers (Windows IA64) [0]:
Printerdrivers (Windows NT Alpha_AXP) [0]:
Printers [10]:
SHARP MX-3100N PCL6
Microsoft XPS Document Writer
HP Photosmart C4500 series Wireless
HP Photosmart C4500 series USB
HP Officejet 4500 G510n-z
HP Deskjet 3500 Series
Canon MP190 series Printer
Brother HL-2270DW series (Copy 1)
Brother HL-2270DW series
Brother HL-2240 series
Printerdriver-Directory (Environment: Windows 4.0):
Result: Success = C:\\Windows\\system32\\spool\\DRIVERS\\WIN40
Printerdriver-Directory (Environment: Windows NT x86):
Result: Success = C:\\Windows\\system32\\spool\\DRIVERS\\W32X86
Printerdriver-Directory (Environment: Windows x64):
Result: Success = C:\\Windows\\system32\\spool\\DRIVERS\\x64
Printerdriver-Directory (Environment: Windows IA64):
Result: Success = C:\\Windows\\system32\\spool\\DRIVERS\\IA64
Install printerport:
Portname : pdfcmon
Result: Success
InstallMonitor:
Monitorname : pdfcmon
Environment : Windows x64
Result: Success
Install printerdriver for WinXP2k3:
Drivername : PDFCreator
Environment : Windows x64
Result: Success
InstallPrinter:
Printername: PDFCreator
Drivername : PDFCreator
Portname : pdfcmon
Result: Success
Printerstatus after installing:
Spooler service: is running
Printermonitors [4]:
pdfcmon
WSD Port
Standard TCP/IP Port
Local Port
Printerports [23]:
pdfcmon
WSD-3ed08242-c7c4-4845-a479-21f46cae915a.006a
WSD-705cb15b-8679-4739-9bcb-b8f48ef4af55.006b
USB005
USB004
USB003
USB002
USB001
DOT4_001
192.168.1.145
192.168.1.4
BRW002258164517
HP_192.168.2.5_CN8ATD30P7059H
COM1:
COM2:
COM3:
COM4:
FILE:
LPT1:
LPT2:
LPT3:
XPSPort:
COM5:
Printerdrivers (Windows 4.0) [0]:
Printerdrivers (Windows NT x86) [0]:
Printerdrivers (Windows x64) [11]:
PDFCreator
SHARP XPS A
SHARP MX-3100N PCL6
Microsoft XPS Document Writer
HP Photosmart C4500 series
HP Officejet 4500 G510n-z fax
HP Officejet 4500 G510n-z
HP Deskjet 3500 Series
Canon MP190 series Printer
Brother HL-2270DW series
Brother HL-2240 series
Printerdrivers (Windows IA64) [0]:
Printerdrivers (Windows NT Alpha_AXP) [0]:
Printers [11]:
PDFCreator
SHARP MX-3100N PCL6
Microsoft XPS Document Writer
HP Photosmart C4500 series Wireless
HP Photosmart C4500 series USB
HP Officejet 4500 G510n-z
HP Deskjet 3500 Series
Canon MP190 series Printer
Brother HL-2270DW series (Copy 1)
Brother HL-2270DW series
Brother HL-2240 series
No printer will be installed.
--- Systeminformation - Start ---
Windowsversion: 6.00.6002
WinDir: C:\\Windows
Win64: true
ProcessorArchitecture: X64
.Net 2.0: true
.Net 2.0 regasm.exe:C:\\Windows\\Microsoft.NET\\Framework\\v2.0.50727\\RegAsm.exe
SystemDir: C:\\Windows\\system32
TempDir: C:\\Users\\Michael\\AppData\\Local\\Temp\\
CurrentDir: C:\\Windows\\system32
Computername: MICHAEL-PC
Username: Michael
UILanguage: 1033
Internet Explorer version: 9.0.8112.16421
Path: C:\\Windows\\system32;C:\\Windows;C:\\Windows\\System32\\Wbem;C:\\Program Files (x86)\\CyberLink\\Power2Go;C:\\Program Files (x86)\\ATI Technologies\\ATI.ACE\\Core-Static;C:\\Program Files (x86)\\Common Files\\HP\\Digital Imaging\\bin;C:\\Program Files (x86)\\HP\\Digital Imaging\\bin\\;C:\\Program Files (x86)\\HP\\Digital Imaging\\bin\\Qt\\Qt 4.3.3;C:\\Windows\\System32\\WindowsPowerShell\\v1.0\\;C:\\Program Files (x86)\\QuickTime\\QTSystem\\
C:\\Windows\\system32\\Wbem\\framedyn.dll: NOT found
framedyn.dll: found in path
--- Systeminformation - End ---
--- Environment - Start ---
ALLUSERSPROFILE=C:\\ProgramData
APPDATA=C:\\Users\\Michael\\AppData\\Roaming
asl.log=Destination=file
CLASSPATH=.;C:\\Program Files (x86)\\Java\\jre6\\lib\\ext\\QTJava.zip
CommonProgramFiles=C:\\Program Files (x86)\\Common Files
CommonProgramFiles(x86)=C:\\Program Files (x86)\\Common Files
CommonProgramW6432=C:\\Program Files\\Common Files
COMPUTERNAME=MICHAEL-PC
ComSpec=C:\\Windows\\system32\\cmd.exe
DFSTRACINGON=FALSE
FP_NO_HOST_CHECK=NO
HOMEDRIVE=C:
HOMEPATH=\\Users\\Michael
LOCALAPPDATA=C:\\Users\\Michael\\AppData\\Local
LOGONSERVER=\\\\MICHAEL-PC
MOZ_PLUGIN_PATH=C:\\Program Files (x86)\\Foxit Software\\Foxit Reader\\plugins\\
NUMBER_OF_PROCESSORS=2
OnlineServices=Online Services
OS=Windows_NT
Path=C:\\Windows\\system32;C:\\Windows;C:\\Windows\\System32\\Wbem;C:\\Program Files (x86)\\CyberLink\\Power2Go;C:\\Program Files (x86)\\ATI Technologies\\ATI.ACE\\Core-Static;C:\\Program Files (x86)\\Common Files\\HP\\Digital Imaging\\bin;C:\\Program Files (x86)\\HP\\Digital Imaging\\bin\\;C:\\Program Files (x86)\\HP\\Digital Imaging\\bin\\Qt\\Qt 4.3.3;C:\\Windows\\System32\\WindowsPowerShell\\v1.0\\;C:\\Program Files (x86)\\QuickTime\\QTSystem\\
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
PCBRAND=Pavilion
Platform=MCD
PROCESSOR_ARCHITECTURE=x86
PROCESSOR_ARCHITEW6432=AMD64
PROCESSOR_IDENTIFIER=AMD64 Family 17 Model
Hello,
there are some problems mixed up here.
The Error 127 only happens on Windows 2000. This is, because Windows 2000 is not supported by our new print monitor driver and we did not realize that. The only way to use PDFCreator on Windows 2000 is to install PDFCreator 1.2.3
@bww: If you disable logging in the PDFCreator main window, the problem should be gone. You do not have sufficient rights to write to the log file.
In the rest of the cases, the Frank's procedure on the end of this thread (#3) should help:
http://www.pdfforge.org/forum/help/8472-132-installation-errors-printing-doesnt-work-all#comment-6017
kind regards,
Philip
I'm having the same problem as last user. Instaleed and reinstalled v1.3.2 multiple times and it wont work. No error message. Printer is installed. Havent tried reinstallin 1.2 yet.